+90 (0262) 722 93 90

info@filsan.com.tr

sales@filsan.com.tr

AIR OIL SEPARATORS

All the FILSAN separators used in rotary vane or rotary screw type compressors which manufactured domestically or abroad, are produced by using specially and meticilously designed components of highest quality and standards. For this reason, most of the compressor manufactures and their exclusive distributors have a tendency to use the FILSAN products.

Filsan has started producing Separators with the new Technology. Filsan’s newly designed separators has nowelding to combine sepatators body and flange.

AIR OIL SEPARATORS

D-Type Separators

These newly designed separators, as shown in Figure, are so designed that they fit the smaller separator housings without reducing the capacity or operating performance of the compressor. When compared to a conventional separator of the same dimensions, these separators have double or even triple capacity. The mentioned increase in capacity is simply achieved by using higher number of wraps in the separators.

 

Separators Types

With technical capacity and experience Filsan can manufacture and design higher capacity Separators upon O.E.M’s and customer requests.

 

Separator Types

Residual Oil content mg/m³ 1to3mg/m³ Operating Temperature 120°C Pressure Drop Bar

Avaible Nominal Flow Rates

(at7bar) (0.7Mpa)

Standart Type 0,17 2 to 42m³/min (special and higher designed separators ara available)
D-Type 0,20 3,5 to 58 m³/min (special and higher designed separators ara available)
Spin-On Type 0,25 0,9 to 6,5 m³/min (special and higher designed separators ara available)

 

FILSAN REF. Type Nr.

d1

(mm)

d2

(mm)

d3

(mm)

d4

(mm)

d5

(Ø) (mm)

d6

(mm)

h1

(mm)

h2

(mm)

Hole Nr.
FS515 1 170 122 - 200 - - 230 12 -
FS516 1 170 122 - 200 - - 435 12 -
FS530 1 135 88 - 170 - - 200 12 -
FS533 - 170 122 - 200 - - 305 12 -
FS501 2 170 122 - 220 13 190 230 12 6
FS502 2 220 165 - 300 15 266 230 12 12
FS508 2 170 122 - 300 15 266 305 12 12
FS509 2 170 122 - 300 15 266 485 12 12
FS673 2 170 122 - 255 18 217 150 12 8
FS518 3 114 66 66 - - - 340 - -
FS521 3 114 66 66 - - - 165 - -
FS636 3 114 66 66 - - - 450 - -
FS670 3 56 25 25 - - - 132 - -
FS807 4 170 108 - 200 - - 305 - -
FS808 4 300 220 - 355 - - 305 - -
FS809 4 300 220 - 355 - - 500 - -
FS581 4 300 220 - 350 - - 400 - -
FS551 4 395 330 - 440 - - 620 - -
FS506 5 220 155 - 300 15 270 350 - 12
FS510 5 170 108 - 300 15 192 175 - 6
FS511 5 170 108 - 300 15 272 230 - 8
FS656 5 170 108 - 300 15 270 - - 8

 

Standart Type Separators

Air oil separators remove compressor lubricant from the compressed air stream. During normal operation, the compressor lubricant is returned to the oil sump and the compressed air continues to the air receiver. A typical oil separator reduces the lubricant entrained in the compressed air to 0,3ppm. Under normal operating conditions an oil separators service life is 4,000 to 6,000 operating hours (when the flow resistance reaches 1 bar (0.1MPa).

FILSAN REF.

Flow Rate

(m³/min)

d1

(mm)

d2

(mm)

d3

(mm)

d4

(mm)

d5

(Ø) (mm)

d6

(mm)

h1

(mm)

h2

(mm)

FS593 9 220 165 - 274 - - 435 12
FS540 12 275 220 - 328 - - 450 12
FS541 14 300 245 - 355 - - 500 12
FS590 17 300 245 - 355 - - 600 12
FS542 19 300 245 - 355 - - 660 12
FS755 20 275 220 - 324 - - 750 12
FS543 24 300 245 - 355 - - 820 12
FS963/S 29 300 230 - 355 - - 1000 12
Seperator Types DOWNLOAD

Seperator Types